Achieving 6A Core Performance Standards

Without the Need for Wire Guides or Wire Guide Dies, We Guarantee:: Ra≦1.0μm for continuous large-area cutting of 30,000mm²; When continuously machining 30 identical workpieces, the consistency error between the 1st and 30th workpieces is ≦0.005mm; For multiple-pass cutting at a thickness of 100mm, the dimensional deviation between the top, middle, and bottom is ≦0.01mm; at a thickness of 200mm, the dimensional deviation is ≦0.02mm; For large-taper cutting (GPD models) at 60° / 50mm thickness, Ra≦1.2μm / 3000mm²; Electrode wire wear is only 0.01mm per 100,000mm² of cutting area (wire replacement is required only after reaching a cutting area of 300,000mm²); Including wire drum reversal time, cutting efficiency can reach 160mm² per minute at a current of 6A or higher